CSU
Greater efficiency and flexibility in slitting
It is easy to fit and integrates at any point of a rotary press, without depending on the structure you already have.
The adjustment knob varies the contact pressure of the knife’s rotary holder, and with it the cutting depth.
Once in place, the fine-thread spindle finishes adjusting the cutter crosswise, to set the cut at the right web width.
The design has been refined to achieve the smallest possible distance between cuts: 10 mm.
The unit takes both, and with either one you can make slitting cuts or perforations.
On a rotary holder. It is the usual option for continuous slitting.
A rectangular blade on a fixed holder, for when the material or the job calls for it.
Spare knives and holders are both available
Mounted on the shafts of the line itself, with as many cutters as the job requires.
Variant
If deeper integration is needed, we supply the complete slitting unit, with a back-up roller and material idler rollers. It is mounted on an existing structure or on a new, adapted one.
It fits into any production line, on an existing structure or on a new, adapted one.
The adjustments make it easy to change the position and depth of the cut.
The knives are replaced quickly when they wear.
Refined to guarantee the smallest possible distance between cuts: 10 mm.
Tell us the web width, the material and the distance between cuts. We will tell you how many units you need and with which knife.
