The best quality on the market, with the fastest delivery
We are manufacturers. We make every die to measure, with the cutting angle and treatment that the material of each job calls for, and with a support department dedicated exclusively to this product.
We follow every stage, from the profile design to the engraving and the final check. And with constant R&D on edges, angles and treatments, to keep pace with materials that change every year.
Full control at every stage of production, from design to engraving.
Custom designs, adapted to the specific requirements of each job.
Delivery in 24 - 48 hours, with production optimised to meet your deadlines.
A support department dedicated exclusively to flexible dies.
The profile angle is chosen according to what has to be cut. It is not an extra: it decides whether the cut is clean and how long the tool lasts.
The same die can carry different heights and cut at two depths: the label kiss-cut and the through cut, without having to split the job between two tools.
Kiss cut and through cut in the same tool, each at its own depth.
Perforation and micro-perforation between labels, so they can be separated without scissors.
Crease lines combined with the outer cut of the shape.
Nested shapes that cut without interruption along the web.
The minimum corner radius is 0.00 mm: the corner is perfectly sharp and the shape of the label is not limited by the tool. The improved cutting geometry maintains quality throughout the run.
And when the job calls for it, we make it with a thin base.
Paper · PP · PE · PET · Tyvek · thin films on PET liner
Mounted on the magnetic cylinder is where it makes sense: the plate adapts to the repeat, the edge goes into the material and the shape comes out clean. The profile and finish are chosen according to the material and the run.
Standard
Suitable for all kinds of single-material self-adhesive products.
Laser-hardened
For long runs and abrasive materials that make die-cutting difficult.
Chrome layer
For abrasive direct thermal and thermal transfer papers, on long runs.
Non-stick
Minimises ink and adhesive residue on the cutting edge and on the plate.
CNC engraving technology makes it possible to manufacture to tolerances of ±0.002 mm.
Made completely to measure according to the specifications of each job.
Meticulous inspections and testing on the real material before leaving the factory.
Send us the die layout, the material and the cylinder it will be mounted on. We will confirm the profile, finish and delivery time.
